machine machine
I want
a machine
arrow arrow

ONE BLADE RIPSAWS

FLS Arrow I.

The FLS Arrow I. technology is the flagship model among the one blade ripsaws from Störi Mantel. This saw is distinguished by its high cutting performance and very extensive options for equipment and mechanisation. The FLS Arrow I. saw is primarily used in medium-sized operations focused on various applications for the processing of wood, as well as non-wood materials. The FLS Arrow I. saw can process prisms, boards, beams, and large-sized materials. The input material can be ripped, trimmed, cross cuted, shaped, and used to produce cross-sections and lamellas. The maximum cutting height of the FLS Arrow I. is 210 mm, higher cut on request. The saw can be operated by a single worker.

 

More information about the machine arrow red arrow white
Safety First

The FLS longitudinal cutting technology is equipped with numerous safety features, allowing the operator to focus solely on the quality of the work without concerns for their health. This applies both during material positioning for cutting and throughout the cutting process, as well as when handling cut material. The machine complies with strict safety requirements derived from relevant EU regulations and directives.

Basic Equipment with Extraordinary Performance

Even with the basic equipment, FLS rip saws achieve exceptional results. Smooth regulation of the blade feed and lift ensures a clean cut and high cutting performance. The blade replacement is easy and, above all, secure, thanks to the quick-locking system "ProLock." The saw carriage is equipped with guiding and side rollers that ensure optimal guidance of the floating unit during cutting without unnecessary vibrations. The upper pressure and adjustable wooden stop secure a firm fixation of the material during cutting, eliminating unwanted movement.

Precision and Error-Free Operation for Higher Efficiency

FLS technology stands out with its quick and easy setup through ergonomically placed controls with a touchscreen panel. The values for cut widths can be entered manually or with the help of the basic "Absolut" program or optional "Chain" and "Optim" Programs. The cutting process is displayed on the material using a laser beam and then longitudinally guided by the sliding saw blade. Thanks to millimetre precision, you can maximise the yield from your material.

Invest Only in What You Need

It's entirely up to you and your requirements. Tell us the parameters and characteristics of your material or the final product, and we will recommend precisely what meets your expectations and what you will use to the fullest, thanks to a wide range of standard and optional equipment.

Surprising Universal Applications

FLS saws can cut prisms, beams, boards, large-sized materials with live edge or straight edge. The input material can be ripped, trimmed, formatted, cut at an angle, and bevelled, grooved, or used to produce cuts and lamellas. The machine is ideal for manufacturers of parquet and solid furniture or staircases. The saw can also be used for cutting non-wood materials such as PUR/PIR panels, materials made of artificial substances, sandwich panels, aluminium, or cement-bonded chipboard.

Rely on Innovative Solutions

Störi Mantel's long-standing experience in the development and production of single-disc circular saws ensures their professional and modern processing. The use of quality materials, top-notch components, and innovative technical solutions shapes a product on which you can build your brand further, ensuring excellent product quality and customer and employee satisfaction.

P A R A M E T E R S T A N D A R D O P T I O N*
Cut material length 2 200 - 7 200 mm up to 16 200 mm
Cut material width 450 mm up to 3 000 mm
Maximum cutting height 210 mm on request
Cutting height adjustment Electronic seven-position switch -
Circular saw blade Ø 400-650 mm -
Blade mounting hole Ø 80 mm -
Quick-change of the saw blade "ProLock" YES -
Main motor 11 kW 15 kW, 18,5 kW, 22 kW
Spindle speed 2 900 rpm Frequency inverter
Smoothly adjustable cutting feed 0 - 80 m/min. -
Table working height 900 mm -
Minimum extraction speed 30 m/s -
Extraction connection throat 2 x Ø 160 mm -
Extraction volume 4 300 m3/h -
Laser 40mW YES -
Second Laser 40mW - YES
Thickness of protective slats 8 mm YES -
Material pressure 3,000 mm standard on the left - YES
Second material pressure (from cutting length 4,200 mm) - YES
Coupled material pressure - YES
Control via 7" Touchscreen panel YES -
Stop positioning via joystick YES -
ABSOLUT + CHAIN + OPTIM program YES -
Start of cutting - Pedal along the entire length of the machine YES -
Automatic regulation of cutting resistance - YES
Adjustment of cutting height in 7 positions YES -
Setting the Cutting Length     YES
Automatic repetition of the cut      YES
Cross conveyor chains for loading or unloading material     YES
Ball plates     YES
Cross table with fixed stop     YES
Cross table additional     YES
Mobile cross table     YES
Temperature control of el. switchboard and control panel     YES
Voltage/frequency electrical connection
~3x400 V/50 Hz 
 -
Compressed air supply pressure min.
0.6 Mpa 
 -
Air consumption
30 l/cut 
 -
Maximum air consumption (depending on the number of cuts)  240 l/min.  -

     * For more information, please refer to the Optional Equipment tab

The FLS Arrow I. ripsaw can be complemented or configured with a range of optional equipment. Here we list the basic possibilities, but if you have a different request or inquiry, we would be happy to discuss it with you.

Saw

More powerful motor - the saw can be equipped with a 15 kW, 18.5 kW or 22 kW motor.

Saw blade of a different diameter - the saw can optionally be fitted with a blade with a diameter of 400-600 mm.

Smooth saw motor speeds - provided by a frequency converter.

Movable control panel - the option to move the panel freely along the length of the saw.

Automatic regulation of cutting resistance

Material handling

Metal rollers - located between the wooden cross planks on the loading table. They facilitate the movement of material on the table.

Metal plates with ball bearings - placed between the wooden lining of the machine. They facilitate the movement of material on the table.

Plastic lining of the cutting area

Plastic cross planks on the loading table

Cutting conditions

Second upper pressure - ensures pressure on the material along its entire length. It is suitable from a length of the cut material starting from 4,200 mm.

Coupled pressure - is always in a parallel position with any length of cut material. It uses a transmission shaft for pressure.

Length of cut material - can be up to 16,200 mm.

Width of cut material - can be up to 3,000 mm.

Second laser

3 or 5 quick selection buttons

Material formatting

Basic cross table (fixed ruler at 90°)

Additional cross table

Mechanisation

Bridge stops - suitable in case the saw is used for cross-cutting longer material.

Chain mechanisation - a device located behind the saw that helps position the material for cutting.

Clamping stop - additional device for perfect clamping and fixation of the material.

Special equipment

Heating of the electrical switchboard and control panel - necessary if the machine is located in unheated spaces.

Do you need more information?

Enter your e-mail, and our sales representative will get in touch with you regarding the machine.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
parameters FLS Arrow I. FLS ECO 120 FLS ECO 170
Saw blade basic (optional) 400 mm (500 mm; 550 mm; 600 mm; 650 mm) 500 mm (450 mm) 550 mm (500 mm)
Motor power basic (optional) 11 kW (15 kW; 18,5 kW; 22 kW) 11 kW (15 kW) 11 kW (15 kW)
Cutting width 450 - 3000 mm 450 - 1600 mm 450 - 1600 mm
Max. cutting height 210 mm 120 mm 170 mm

Watch a video
about this machine

Save costs

Save costs

Minimizing waste and unnecessary cutting of expensive materials, flexibility in your orders, and easy machine maintenance lead to a quick economic return on investment and reduced operating costs.

Make production<br>more efficient

Make production
more efficient

Speed, accuracy, and high-quality cutting ensure more efficient material yield.

Reduce the<br>workforce needed

Reduce the
workforce needed

Simple solutions facilitating machine operation and handling of heavy materials enable a reduction in the number of workers.

Safety first and foremost

Machines meet strict occupational safety requirements outlined in relevant EU regulations and directives. They are equipped with numerous safety features to allow operators to focus solely on the quality of their work.

Precision and without unnecessary errors for higher efficiency

Thanks to millimeter precision, each ripsaw in our range allows you to maximize the yield from your material.

I am interested in this machine arrow arrow

Do you need more information?

Enter your e-mail, and our sales representatives will get in touch with you regarding the machine.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
loading
scroll top scroll top

Before you continue

We constantly try to improve our website and we need data to do so. We collect them through cookies, that help us analyze traffic and personalize advertisement. If you do not agree with collection click here.

Cookies - settings

close

We constantly try to improve our website and we need data to do so. We collect them through cookies, that help us analyze traffic and personalize advertisement. If you do not agree with collection click here.

Manage consent preferences

Strictly necessary cookies

These cookies are necessary for the website to function.

always active

Targeting cookies

They collect information that helps tailor ads to your interests.

Functional cookies

With functional targeting we will process information about your behaviour on our website. Thanks to that we are able to offer you exactly what you are interested in.

Analytics cookies

They help us find out who visits our website and how people use it. Thanks to those data we can efficiently improve our content and websites functionality.